|
Items |
Technical parameters |
||
|
Model |
TPS110M-Flycart30 |
TPS220M-Flycart30 |
|
|
Cable length |
110M |
220M |
|
|
Ambient temperature |
-20~45 ℃ (working), -40~65 ℃ (storage) |
||
|
Relative humidity |
10-80% RH (working), 5-90% RH (storage) |
||
|
Altitude |
≤ 3000m |
||
|
Tethering power module |
Input voltage |
380 ± 10% VAC, three-phase five wires, frequency 50Hz |
|
|
Output power |
≥ 25000W (rated long-term output), ≥ 30000W (peak value ≤ 30s) |
||
|
Retraction speed |
0-3m/s, adjustable |
||
|
Reel in/out tension |
0-20N, adjustable |
||
|
Interface |
Input aviation plug, cable output LP20 aviation plug, fiber optic FC port (optional) |
||
|
Buttons and switches |
AC switch, high-voltage on/off button, cable forced take-up button, backup power switch |
||
|
Protection |
IPx4 |
||
|
Size |
600×570×460±0.5mm, excluding foot pads and external accessories |
||
|
Weight |
54±0.5kg, excluding tethered cables |
||
|
Tether cable |
Material |
Alloy lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer |
|
|
Optical Fiber (optional) |
Tethered cable is an optoelectronic composite cable, contains tightly wrapped single-mode fiber and can be optionally equipped with fiber optic communication |
||
|
DC resistance |
1.6 ± 0.1 Ω, 100m@20 ℃ loop |
||
|
Tensile strength |
≥ 300kg, resistant to repeated retraction and release times ≥ 1000 |
||
|
Insulation strength |
≥ 3500Vdc, no breakdown for 1 minute |
||
|
Cable length |
Standard 110m, optional 220m |
||
|
Outer diameter |
6.3±0.1mm |
||
|
Weight |
44±1g/m |
||
|
Air module |
Input voltage |
580-810Vdc wide range input |
|
|
Output voltage |
59Vdc ± 1%, constant stable output, supports voltage customization |
||
|
Output power |
≥ 19200W (rated long-term output), ≥ 23000W (peak value ≥ 10s) |
||
|
Protection function |
Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection |
||
|
Isolation voltage |
≥ 3000V (Vin Vout), 1min, leakage current 5mA, no breakdown, flashover, or corona phenomenon |
||
|
Installation method |
Replace a drone battery and install it directly by plugging and unplugging it |
||
|
Heat dissipation method |
Built in fan for active cooling, reserved air duct for forced air cooling |
||
|
Interface |
Input LP20 aviation plug, output XT90, XT60 ×2 |
||
|
Protection |
IP54 |
||
|
Size |
468 × 308 × 142 ± 0.5mm, excluding handles and connectors |
||
|
Weight |
9.8 ± 0.2kg (replace one 11.5kg drone battery) |
||
